Management and Monitoring
Network Management Cards
Each Liebert APS UPS comes with the IS-UNITY-DP card pre-installed, with 2 additional empty Intellislot ports available for any of the below networking cards.
| Part Number | Description |
|---|---|
|
RDU120 Card |
Network Communication Card with 10/100/1000 Mbps Ethernet, web interface, SNMP, BACnet IP/MSTP, Modbus TCP/RTU and environmental sensor support. UL-2900-1 certified. Includes a configuration cable. |
|
IS-UNITY-DP |
Network communications and Environmental Sensor Support |
|
IS-UNITY-SNMP |
SNMP Network communications for interfacing to Network and Building Management Systems |
|
IS-RELAY |
Provides relay signals for connection to customer’s hardwire terminal block |
Environmental Sensors (For use with RDU120)
| Part Number | Description |
|---|---|
|
GT3HD |
Temperature, humidity, and dew point sensor with dual inputs for included 3ft / .9m and 6ft / 1.8m temperature sensors for monitoring top, middle, and bottom of a rack or cabinet. Includes a supplementary input for daisy-chaining additional sensors. Includes 10ft / 3m cable. |
|
GT3HD-50 |
Temperature, humidity, and dew point sensor with dual inputs for included 3ft / .9m and 6ft / 1.8m temperature sensors for monitoring top, middle, and bottom of a rack or cabinet. Includes a supplementary input for daisy-chaining additional sensors. Includes 50ft / 15.2m cable |
|
GTHD |
Temperature, humidity, and dew point sensor. Includes a supplementary input for daisy-chaining additional sensors. Includes 10ft / 3m cable. |
|
GTHD-50 |
Temperature, humidity, and dew point sensor. Includes a supplementary input for daisy-chaining additional sensors. Includes 50ft / 15.2m cable. |
|
SRT-12 |
Temperature sensor used to monitor temperature in critical environments. Includes a 12ft / 3.6m cable |
|
SRT-20 |
Temperature sensor used to monitor temperature in critical environments. Includes a 20ft / 6.1m cable |
|
SRT-50 |
Temperature sensor used to monitor temperature in critical environments. Includes a 50ft / 15.2m cable. |
|
SRT-100 |
Temperature sensor used to monitor temperature in critical environments. Includes a 100ft /30.4m cable. |
|
RTAFHD3-12 |
Temperature, airflow, humidity, and dew point sensor. Includes 12ft / 3.6m cable. |
|
RTAFHD3-20 |
Temperature, airflow, humidity, and dew point sensor. Includes 20ft / 6.1m cable. |
|
RTAFHD3-50 |
Temperature, airflow, humidity, and dew point sensor. Includes 50ft / 15.2m cable. |
|
RTAFHD3-100 |
Temperature, airflow, humidity, and dew point sensor. Includes 100ft / 30.4m cable. |
Environmental Sensors (For use with IS-UNITY-DP)
| Part Number | Description |
|---|---|
|
SN-2D |
Two-Door Switch Monitor Sensor Probe With Two Inputs |
|
SN-3C |
Three Dry Contact Input Monitor Sensor |
|
SN-L20 |
Leak Detection sensor |
|
SN-T |
Sensor Single Modular Temperature Probe |
|
SN-TH |
Modular Sensor | Temperature Humidity Rack Monitoring |
|
SN-Z01 |
Integrated Temperature Sensor |
|
SN-Z02 |
Integrated Temperature Sensor |
|
SN-Z03 |
Integrated Temperature and Humidity Sensor |
UPS Management Software
| Part Number | Description |
|---|---|
|
Vertiv™ Power Insight is free software that helps improve efficiency, protects valuable critical equipment, and increases visibility of your network enabled UPSs and rPDUs. It is a web-based application designed for users with a distributed infrastructure who need a way to manage multiple devices. |
|
|
Vertiv™ Power Assist is free software used to gracefully shutdown an IT device when the UPS battery backup experiences a threatening condition. The software notifies users of an event, displays key metrics and logs historical data. It is easy to install and protects computers from damage and data loss during a power event. For use with a USB connection. |
